Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$19.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$83.99
Upgrade or refresh your bike. - Affordable alloy seat mast cap - Direct fit on all Trek road bikes with round seat masts - 2-bolt design offers independent setback and tilt adjustments - Includes 7mm round saddle clamp ears
$59.99
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
$24.99 - $30.99
Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
$7.99 - $15.99
Connecting links for Origin8 chains
$17.99
Replacement brake hoods for Origin8 Classique Sport road levers
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$11.99
- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
$33.99
- AL6061 alloy construction - Non-keyed design - Jar of 40 spacers
$15.99
- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$4.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
$48.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$5.99
22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.
$9.99
• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$11.99
- Sunlite replacement cartridge bearings - Sold in pairs
$9.99 - $11.99
- Stainless steel button head bolts - Sold in bags of 10
$9.00
M15/M26 Alloy GXP Crank Arm Bolt Kit
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
$29.95
- Designed for use with MRP ISCG-05 boomerang chain guide systems - Adapts ISCG-05 compatible chain guide to fit BB-mount (flange/lockring)
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$85.00
RockShox Reverb/Reverb Stealth IFP - Fits Reverb and Reverb Stealth