Light, compact, and fits all the essentials to repair a mid-ride mechanical. The Backcountry Tool Pack fits all the essentials to fix a mid-ride mechanical. There’s space for a mountain bike inner tube (or two road ones), a small multi-tool, tire levers, and a CO2 canister. Designed for off-road riding, this lightweight, all-weather tool bag is constructed from a four-layer laminated fabric suited for hard outdoor use. That means waterproofing, low stretch, and high abrasion and tear resistance to keep gear dry and secure. Fitting neatly under the saddle, it fastens to the saddle rails with an easy-to-use reinforced Velcro strap that loops around and secures the tool bag to the bike. Durable Hypalon coats the surface to minimize wear and tear on the Pack, and keeps bike frames in good condition. While the body fabric of this bag is waterproof, due to the stitching process used to assemble the product, there is the possibility for water to enter through the seams when exposed to sustained rain. We recommend using an internal dry bag for contents that must remain absolutely dry. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Apidura - Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Hard-wearing, all-weather Dimension-Polyant VX21, with Hypalon in high-wear areas Materials - The tool bag is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry. Designed to fit the demands of off-road riding, the material combines waterproofness, light weight, low stretch, and high abrasion and tear resistance. - The Velcro strap is reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture in areas of high stress. For the fastening system, Woojin buckles are used for their reliability. Care - Wash by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.
Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.
$167.00 - $175.00
The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.
A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.5 L / 29 cu in - Weight 57g / 0.13 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip
A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 1.3 L / 79 cu in - Weight 93g / 0.21 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating and a red interior liner to improve internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Ultra-visible 3M triangle logo - LED light clip
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs
Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.
A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches
The Banjo Brothers Quick-Release seat bag. Remove your seat bag quickly with no fuss. Great for security and for using one bag across two or more bicycles. Easy on/off Twist tabs onto seat rails and then attach the seatpost strap. Two sizes. - Heavy duty 840 denier nylon construction - Cinch-strap to keep contents snug - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents and web loop for light - Light loop - Fits most saddle rails
Some need the extra capacity that Banjo Brothers' Minnehaha Canvas Barrel bag has, some just like the classic look. Either way, everyone can agree that it's awesome. It'll fit either under your saddle, on your bars or even on a rear rack, and it has plenty of room for a tool kit, spare jacket and a cable lock (each sold separately). Or maybe a small picnic, who knows? A sturdy interior hull prevents sagging, a detachable lower strap controls swaying, and a leather tab lets you attach a blinkie.
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you extra carrying capacity, it classes up any ride. It uses leather straps to securely attach to your saddle at three different points to reduce sway and the front is tapered for leg clearance. With plenty of room for a tool kit, lunch, rain jacket, etc., you'll never be without your gear. The shaped interior supports your gear without sagging and you've got leather reinforcements in all high-wear areas, too. Clever details include a leather tab for lashing extra gear or attaching a blinkie, detachable reflective tabs, an interior pocket and a key clip.
No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
The BiKASE Momentum family of saddle bags is the perfect compliment to any ride. With a narrow and contoured design, the Momentum fits snugly between the seat post and saddle without interfering with the rider, and, with a double strap design, it couldn't be easier to install. Round that out with a taillight mount, reflective striping, three sizes and multiple colors, there is a Momentum for you. • Reflective stripes • Internal mesh pocket • Internal Elastic band • Strap light holder • Small: 25 cubic inches • Medium: 50 cubic inches • Large: 75 cubic inches
BiKASE's Wasp Saddle Bag is a durable, weather resistant case made of thermoplastic polyurethane with a waterproof zipper. The quick release mounting system fits regular seat rails and up to 10mm carbon rails. Interior mesh pocket, elastic band, and lining to keep contents organized. Plus, the Wasp is easy to clean because molded case does not absorb mud, dirt, or water. • Material: TPU • Size: 6 x 4 x 3 ½-inches • Volume: 37 cubic inches • Weight: 200 g • Rear light holder
BiKASE's Wing Side Open Seat Bag offers easy access to your belongings. No more reaching way back and trying to find your stuff as compared to rear entry bags. It features external pockets for small items and attaches easily with molded nylon T bracket and 2 hook & loop straps. With 110 cubic inches of storage capacity, it will even hold a windbreaker for those longer rides when the weather changes! Will hold a fat tire tube as well. • 2 side pockets • 2 Teflon coating mesh pockets • Webbing light holder/Rear reflective dots • PE stiffener structure • Universal-fitting T-bar mount • 2 Velcro straps for seat post mounting • Material: 840 denier nylon • Teflon coating fabric • Size: 20cm x 11cm x 10cm • Volume: 1.8 Liter • Weight: 180 g
The Medium Packer Seat Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 16” x 6” x 5” - Up to 550 cubic inches
Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Internal pockets securely hold credit cards and valuables - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 23 cu. in. (380cc) capacity
Key features: - Hook and loop saddle attachment firmly keeps bag connected to your bike - Low-profile seatpost attachment prevents bag from swinging while riding - Internal pockets securely hold credit cards and valuables - Loop on face of bag easily attaches clips for rear lights - Reflective elements enhance visibility for maximum safety anytime - Light and robust material holds up to elements without contaminating contents - 57 cu. in. (940cc) capacity
Hilo Integrated Speed Storage mounts directly to the Hilo Pro or Comp saddle to add a verstatile storage component to your TT or Tri bike. Multiple configurations enable storage for one or two water bottles, tube or tubular, as well as multi-tool, tire levers, and CO2. Best of all, the design works with the bike and rider's aero profile to minimize drag. - Attaches to Hilo Pro or Comp saddle for aerodynamic water bottle and accessory storage - Securely holds CO2, inflator, and lever in compact accessory bag - Adaptable strap can be easily set up to hold spare tube or tubular tire - Secure aerodynamic mounting for up to two water bottle cages
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
$24.99 - $29.99
The cordura material of The LIN:K’s shell is heard-wearing and good looking, while its inner mesh pocket keeps contents organized and protected, and a water-resistant zip and semi-auto lock puller keeps things dry and secure. Reflective logos and piping right round the edges help keep you visible after dark from both sides and the rear. The hard-wearing, secure Velcro attachment strap means it’ll easily fit any bike. - Cordura Shell with Velcro Straps - Color: Anthracite - WP zip - Internal mesh pocket - Reflective piping - :K and fi'zi:k reflective logos
The Clutch recycled and upcycled bicycle inner tube saddle bag is similar to the Shifter, only a little smaller. This bag fits snugly under your bike seat and can hold an extra tube, tools, and repair kit. It secures into place with a wrap-around strap offering a stable storage solution when you’re on the road. The storm-resistant exterior will keep your belongings dry in the rain, hail or snow. The reflective light loop enhances your visibility. Materials: - Upcycled Bicycle Inner Tubes - Upcycled Nylon Fabric - Nylon Teeth with Zinc Zipper - Hook & Loop, Nylon - Metal Hardware - Dimensions:3 L x 3.5 H x 5 D in./76.2 x 88.9 x 127 mm - Capacity: 52 cu in/.8 L - Weight: 3.5 oz/99.2 g Features: - Stormproof exterior - Reflective light loop - Universal hook & loop mounting straps - Built in Colorado - Made in the USA - Limited Lifetime Warranty
The Hauler Bike Packing Bag is a convertible saddle/messenger bag that is lightweight and versatile for each rider. It’s an easy way to carry a substantial amount of cargo to keep on your bike without wearing a pack and can be used as a messenger once you’re off to work, school, or play. NOTE: Photos of bags may not reflect the actual color. Each one is made with Upcycled Nylon, so colors and prints will vary. Materials: - Upcycled Colored Fabrics - Nylon Teeth with Zinc Zipper - 10 oz Vinyl Waterproof Tarp - Nylon Fabrics - Hook & Loop - Nylon and Metal Hardware - Dimensions: 9 L x 5 H x 22 D in./228 x 127 x 558 mm - Capacity: 990 cu in./16.2 L - Weight: 17.6 oz/498.9 g Features: - Universal hook & loop mounting straps - Roll-Top design excludes the need for zippers - Easy access front pockets - Frame plate secured all side to protect cargo - Straps are minimized for cyclists safety - Built in Colorado - Made in the USA - Limited Lifetime Warranty
The Tire Bag 2, with its rectangular main pocket and two zippered side pockets, is an excellent option for road or mountain bikers who need extra room. - Hook and loop at the seat post, and a 3/4-inch nylon strap provides an extremely stable mounting system - Designed to hold a tubular tire and tools, perfect to carry longer or larger tools - Can be mounted on the frame or under the saddle - Weight: 90 grams - Capacity: 84 cubic inches
The Bike Bag can be mounted on either the seat rails or the handlebars. - Two point attachment to handlebar or saddle - Perfect for cruiser and comfort bikes - Made of DuPont Cordura - 3M reflective striping for visibility - Weight: 80 grams - Capacity: 150 cubic inches
$28.95 - $29.99
The Mini Mountain Wedge Series offers seat bags that are designed to stand up to the rigors of serious on- and off-road cycling. - Large main compartment and small exterior zip pocket - The three-point suspension system consists of a seat post hook-and-loop strap and a 3/4-inch main webbing strap that threads over each seat rail - A side-squeeze buckle allows for easy removal - Made of Dupont Cordura - Weight: 99 grams - Capacity: 53 cubic inches
The Mountain Wedge Expandable is the ideal wedge for the rider who occasionally wants to carry extra gear. - The three-point suspension system, with a side-release buckle on the main strap for easy access - Hook-and-loop material on the sides for added stability and load compression - The main strap provides support in both closed and expanded modes - Flat pocket on the underside of the bag - Made of Dupont Cordura - 3M reflective trim - Weight: 190 grams - Capacity: 115 cubic inches
Page 1 of 3 Next page