Filter By:
- Bottom Brackets (279)
- Brakes/Levers/Pads (880)
- Cables (266)
- Cassettes/Freewheels (206)
- Chainrings (338)
- Chains (165)
- Cranksets (360)
- Derailleurs (194)
- Show More Categories
- Forks (181)
- Handlebar Grips/Tape (384)
- Handlebars (406)
- Headsets (211)
- Pedals (457)
- Saddles (488)
- Seatposts (136)
- Shifters (131)
- Shocks (40)
- Stems (196)
- Tires/Tubes (1504)
- Wheels (1272)
- Other (2166)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$625.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way.
This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide.
- Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions.
- Lower tire pressures and larger volume provides a compliant ride with fewer vibrations.
- Significant watt savings when running larger tires at lower pressure.
- Wide, hookless rims create a seamless transition to the tire, reducing drag.
- Fastest with 28mm, but fits wide gravel tires as well
- New Zipp graphics and cosmetic identity that scream speed
$675.00 - $727.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way.
This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide.
- Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions.
- Lower tire pressures and larger volume provides a compliant ride with fewer vibrations.
- Significant watt savings when running larger tires at lower pressure.
- Wide, hookless rims create a seamless transition to the tire, reducing drag.
- Fastest with 28mm, but fits wide gravel tires as well
- New Zipp graphics and cosmetic identity that scream speed
$30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$110.00
With ergonomic flat tops and easy-to-reach drops, Zipp’s Service Course SL-70 Ergo bars ensure comfort and control for every hand position. A short reach to the brake hoods and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
$110.00
Zipp’s Service Course SL-70 bars let you dial in the perfect fit. A short reach to the brake hoods and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch.
• Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
$199.95 - $209.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$29.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only
$29.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only
$54.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$54.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$59.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$25.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$25.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$4.00 - $15.00
Whisky Parts Co. Tubeless Rim Tape.
$0.60 - $30.00
- Anodized aluminum
- 50 nipples per bag
- 12mm length
$1.00 - $70.00
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50
$1.25
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50
$1.00
- Cold forged 2.0mm 304 stainless steel with rolled threads
- Nipples sold separately
- 213g (32 spokes @ 262mm)
- Bag of 50
$0.70 - $1.00
- Cold forged 2.0mm 304 stainless steel with rolled threads
- Nipples sold separately
- 213g (32 spokes @ 262mm)
- Bag of 50
$20.48
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 22 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag
$129.99
Thread together bottom bracket for frames using the BBRight bottom bracket standard and SRAM DUB compatible cranks with 29mm spindle diameter. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x - Silicone dust seals
- 2x - 0.5mm crank spindle spacers
- 2x - 1.0mm crank spindle spacers
- 1x - 2.5mm crank spindle spacer
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: BBRight Press Fit
- Bottom Bracket Shell Width: 79mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 29mm
- Tool Pattern: 48.5mm x 16 notch
- Over Bearing Width: 91.5mm in 79mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Weight: 146g
$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$2.00
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$5.00
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$6.83
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$12.55
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
Page 1 of 342
Next page