Tires/Tubes

This tire is designed to shed mud and deliver traction on pavement and dirt. The Cultivator doubles as a solid tire for both the commuter and cyclocross rider.

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

- Ramped center knobs - High shoulder blocks - Available in two Plus sizes

- Lighter and faster than the original - Control and predictability of the original but with less rolling resistance and weight - Front and Rear application

- Lug pattern designed to give greater progressiveness, terrain versatility and maximum grip when braking - New 3x33 TPI casing with high-density fibers, lighter, more comfortable and robust, tailored to Enduro racing - Maximum durability with the new Gravity Shield casing, offering greater ride comfort - A tire co-developed with and validated by the world's best EWS riders - Rear-specific tread design

- Comfortable ride - Classic colors

- Hybrid tire with style

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Type: Patch Cement Size: Individual tube

Alloy air valve caps help prevent air loss

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Anodized alloy construction - Fits standard Schrader valves

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level. - 5-pack

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

Whisky Parts Co. Tubeless Rim Tape.

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- Snap-On high-Pressure plasticized nylon protects tube from abrasion - Older stock is yellow, New stock is black with halo logos

Pack of 10 replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit.

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Standard .97mm wall thickness butyl tube - Most popular CST tube for general-purpose riding

- The Pressure Relief Valve Stem Nut has been designed to ensure that an improper tubeless tape job doesn’t result in a damaged rim. - If the tubeless seal between tire’s air chamber and the rim’s cavity is breached, the rim’s cavity can become pressurized resulting in a pressurized rim and potential delamination of the rim’s sidewall. The Pressure Relief Valve Stem Nut prevents this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. - Air escaping from these ports, indicates a compromised tubeless seal. - Recommended for all tubeless SES wheelsets as well as other brand road tubeless wheelsets. - Each order includes two nuts, enough for one wheelset.

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area

- Premium alloy presta valve caps in an array of colors

Poly-Lite Rim Tape is a thin, tough shield to protect your tube from the rim and spoke nipples. Road and mountain rim width sizes available. Great insurance against flats. Why take a risk that your tube may sustain damage from the rim itself? Poly-lite is the very light way to go.

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm